HDMI splitter basics
Two-way HDMI Splitter
This Rocketfish two-way HDMI splitter will send the HDMI audio and video signals
from a single source, such as a Blu-ray/DVD player or cable/satellite box, to two
destinations, such as a TV and A/V receiver. It is ideal for sending the audio signals
from a 3D Blu-ray player to an A/V receiver that does not support 3D video pass-
thru.
Setting up your HDMI splitter
1
2
3
4
Connect one end of a high-speed HDMI cable (not included) to your video
source and the other end to the IN port on the HDMI splitter.
Connect another high-speed HDMI cable to your HDMI splitter’s OUT 1 port to
an HDTV.
Connect another high-speed HDMI cable to your HDMI splitter’s OUT 2 port to
an A/V receiver.
Connect the included AC adapter from the DC jack on the HDMI splitter to a
standard 110/120V AC outlet. Power on all connected devices and operate per
the manufacturer’s instructions.
Package contents
• HDMI splitter
• AC power adapter
• Quick Setup Guide
Features
• Sends HDMI A/V signals from a single source,
such as a Blu-ray/DVD player, set-top box, to
two destinations, such as a TV and A/V receiver.
• Supports full 1080p video resolution
• Supports 3D video
You will need:
• High-speed HDMI cables
• Compatible with most TV and PC monitor
video resolutions
Connecting a TV and A/V receiver to a single HDMI source
Front
HDMI video source
Power LED
HDMI splitter
Back
A/V receiver
HDTV
HDMI IN port
HDMI
OUT 1 port
HDMI
OUT 2 port
DC power 5V/1A connector
QUICK SETUP GUIDE
RF-G1182
|
Radio Shack Radio TRC 442 User Guide
Radio Shack Stereo Amplifier XL 150 User Guide
Radio Shack Two Way Radio TRC 234 User Guide
Radio Shack Universal Remote 15 2127 User Guide
Renesas Network Card R0E521237CFK00 User Guide
Riverstone Networks Network Card SSG User Guide
Saitek Computer Keyboard Overlay Keyboard User Guide
Samsung Security Camera SCC B9372 User Guide
Sanus Systems Indoor Furnishings AFV48 User Guide
Sennheiser Headphones CX 880 User Guide