BD-E5400
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
ENGLISH
12. Use only with the cart,
stand, tripod, bracket,
• Disc Storage
` Do not keep in direct sunlight.
Contents
or table specified by
` Keep in a cool ventilated area.
the manufacturer,
` Keep in a clean protection jacket and
Language Settings.....................................13
Security Settings........................................13
General Settings........................................13
Support Settings .......................................13
SAFETy INFORmATION
or sold with the
store vertically.
apparatus. When
Warning.......................................................2
Precautions .................................................2
Disc Storage & Management.......................3
Handling Cautions .......................................3
Copyright ....................................................3
a cart is used, use
Handling Cautions
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
mEdIA pLAy
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Insert a Disc ..............................................14
Insert a USB Device...................................14
Controlling Video Playback ........................15
Controlling Music Playback........................15
Playing Photo Contents.............................16
• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
GETTING STARTEd
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Before using the User Manual......................4
Logos of Discs the player can play ..............4
Accessories.................................................5
Front Panel..................................................6
Rear Panel...................................................6
Remote Control...........................................6
• Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
AppENdIx
• Maintenance of Cabinet.
Troubleshooting.........................................16
-
-
Before connecting other components to
this player, be sure to turn them off.
Specifications............................................18
If you move your player suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and
lens and cause abnormal disc playback. If
this occurs, unplug the player, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
CONNECTIONS
Disc Storage & Management
• Holding Discs
A. Connecting to a TV .................................7
B. Connecting to an Audio System..............7
C. Connecting to a Network ........................7
-
Fingerprints or scratches
on a disc may reduce
sound and picture quality
or cause skipping
SETTINGS
• If the product makes an abnormal noise
or produces a burning smell or smoke,
turn off the power switch immediately and
disconnect the power plug from the wall
outlet. Then, contact the nearest customer
service center for technical assistance. Do
not use the product. Using the product as
it is may cause a fire or an electric shock.
The Initial Settings Procedure.......................8
Menu Navigation..........................................8
Accessing the Settings Menu ......................9
Display Settings...........................................9
Audio Settings...........................................10
Network Settings.......................................10
System Settings ........................................12
-
-
-
Avoid touching the surface of a disc
where data has been recorded.
Hold the disc by the edges so that
fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
• Cleaning Discs
Copyright
-
If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water
and wipe with a soft cloth.
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
-
When cleaning, wipe gently
from the inside to the outside of the disc.
3
•
Some USB/External HDD/digital camera
Region Code
devices may not be compatible with the player.
Getting Started
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
• Your player supports the FAT16, FAT32,
and NTFS file systems.
Before using the User Manual
•
Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
The Region Code for this player is displayed
on the rear panel of the player.
disc Types and Contents your player can play
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
Media
Disc Type
Details
Region
Disc Type
Area
•
The player does not support the PTP protocol.
Code
Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
• Do not disconnect a USB device during a
DVD-VIDEO
DVD-RW
DVD-R
North America, Central
“loading” process.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing MKV
or MP4 contents.
Blu-ray
Disc
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
VIDEO
• The bigger the image resolution, the longer
A
the image takes to display.
DVD+RW
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
DVD+R
DVD-
The U.S., U.S. territories and
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
1
VIDEO
Canada
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
MUSIC
PHOTO
•
Your player only supports video with a
frame rate under 30fps (frames per second).
• Your player only supports USB Mass
Storage Class (MSC) devices such as
thumb drives and USB HDD. (HUB is not
supported.)
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Logos of Discs the player can play
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
NOTE
✎
• Certain USB HDD Devices, multi-card
readers and thumb drives may not be
compatible with this player.
`
`
`
`
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Blu-ray Disc
BD-LIVE
• If some USB devices require excessive
power, they may be limited by the circuit
safety device.
Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds
25 Mbps.
• If playback from a USB HDD is unstable,
provide additional power by plugging the
HDD into a wall socket.
`
Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
NTSC broadcast system in U.S.A, Canada, Korea, Japan
If the problem continues, contact the USB
HDD manufacturer.
`
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Supported File Formats
• You must remove the USB storage device
safely. (by performing the "Safely Remove
USB" function to prevent possible damage
to the USB memory.)
disc types your player cannot play
Notes on the USB connection
• HD DVD
• DVD-RAM
• DVD-RW(VR mode) • 3.9 GB DVD-R for
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
Authoring.
Press the HOmE button to move to the
home screen, press the yELLOW (C)
button, and then press the v button.
• DVD-ROM/PD/
• Super Audio CD
• CVD/CD-ROM/
MV, etc
(except CD layer)
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
• The player does not support folder or file
names longer than 128 characters.
4
• SAMSUNG is not responsible for any data file damage or data loss.
• Audio decoder
• Your player does not support NTFS compressed files, sparse files, or encrypted files.
• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
- Supports WMA 7, 8, 9 and STD
- Does not support WMA sampling rate of 22050Hz mono.
Video File Support
Music File Support
File Extension
Container
Video Codec
MP4v3
Audio Codec
Resolution
1920x1080
File Extension
Container
Audio Codec
Support Range
*.mp3
-
MP3
Dolby Digital
DTS
MP3
MP3
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
*.avi
AVI
*.wma
WMA
WMA
* Bit rates - All bit-rates from 5kbps to 384kbps
WMA
1920x1080
H.264 BP/MP/HP
PCM
AVCHd (Advanced Video Codec High definition)
MP3
Dolby Digital
DTS
1920x1080
1920x1080
VC-1 AP
• This player can play back AVCHD format discs. These discs are normally recorded and used
*.mkv
MKV
in camcorders.
H.264 BP/MP/HP
• The AVCHD format is a high definition digital video camera format.
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
VC-1 AP
*.wmv
*.mp4
WMV (wmv9)
MP4
WMA
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
VC-1 SM
conventional image compressing format.
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
• Some AVCHD discs use the “x.v.Color” format. This player can play back AVCHD discs that
AAC
use “x.v.Color” format.
MP1, 2
Dolby Digital
DTS
• “x.v.Color” is a trademark of Sony Corporation.
*.mpg
PS
MPEG2
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
*.mpeg
and Sony Corporation.
H.264 BP/MP/HP
NOTE
✎
• Limitations
`
Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
- Even when a the file is encoded by a supported codec mentioned above, the file might not
be played if its content has a problem.
`
`
“x.v.Color” offers a wider color range than normal DVD camcorder discs.
- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.
- Files having higher Bit rate/frame rate than standard may stutter during sound/video playback.
Accessories
- The Seek (skip) function is not available if the file’s index table is damaged.
• Video decoder
Check for the supplied accessories shown below.
- Supports up to H.264 Level 4.1 and AVCHD
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
Batteries for Remote Control
(AAA Size) (BN43-00004A)
User Manual
(AK68-02273A)
Remote Control
(AK59-00146A)
5
Front Panel
Remote Control
PLAY/PAUSE BUTTON
Tour of the Remote Control
STOP BUTTON
Turn the player on and off.
Press to eject a disc.
Turn the TV on and off.
OPEN/CLOSE BUTTON
POWER BUTTON
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press numeric buttons to operate options.
Use to enter the disc menu.
Use to enter the popup menu/title menu.
Press to skip backwards or forwards.
Press to search a disc backwards or
forwards.
REMOTE CONTROL SENSOR
Press to stop a disc.
Press to play a disc.
Press to move to the home menu.
Press to pause a disc.
DISC TRAY
Press to use Netflix.
Press to use Pandora.
NOTE
✎
`
When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and
Press to use Tools menu.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
then press the
button.
v
Use to select menu items and change menu
values.
Rear Panel
Press to exit the menu.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Allows you to repeat a title, chapter, track or
Press to see the full screen on a TV.
disc.
Press to switch the Blu-ray Disc/DVD’s
Use to access various audio functions on a
subtitle language.
disc (Blu-ray Disc/DVD).
NOTE
Installing batteries
✎
`
If the remote does not operate properly:
•
•
•
Check the polarity (+/–) of the batteries.
Check if the batteries are drained.
Check if the remote sensor is blocked by
obstacles.
HDMI OUT
USB HOST
•
Check if there is any fluorescent lighting nearby.
NOTE
✎
CAUTION
!
`
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
`
Dispose of batteries according to local environmental
6
regulations. Do not put them in the household trash.
Connecting to an Audio System (HdmI supported AV receiver)
Connections
1.
2.
Using an HDMI cable, connect the HdmI OUT terminal on the rear of the player to the
HdmI IN terminal of your AV receiver. See page 8.
A. Connecting to a TV
Using an HDMI cable, connect the HdmI OUT terminal of the AV receiver to the HdmI IN
terminal of your TV.
Connecting to a TV with an HdmI Cable
3.
Turn on the player, TV, and AV receiver.
4.
Using the input select button of the AV receiver and TV, select the correct HDMI input or
source on each to hear sound and see video from the player. Refer to your AV receiver’s
user manual to set the AV receiver’s audio input.
1.
Using an HDMI cable, connect the HdmI OUT terminal on the rear of the player to the
HdmI IN terminal of your TV. See page 8.
2.
Turn on the player and TV.
5.
If this is the first time you have turned on the Blu-ray player, the Initial Settings screen
3.
Press the input selector on your TV remote control until the HDMI signal from the player
appears. See page 8.
appears on your TV screen.
4.
If this is the first time you have turned on the Blu-ray player, the Initial Settings screen
appears. See page 8.
C. Connecting to a Network
This player lets you use network based services, such as BD-LIVE, and download software
upgrades when it is connected to a network. We recommend using a Broadband modem (with
integrated router) or an IP router for the connection. For more information on router connections,
refer to the user manual of the router or contact the router manufacturer for technical assistance.
NOTE
✎
`
`
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a
High speed (category 2) HDMI cable.
`
HDMI outputs only a pure digital signal to the TV.
Wireless Network
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
1.
2.
You can connect this unit to a network via a wireless connection. See page 8.
`
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
Set the network options. See pages 10~12.
your TV.
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI
output resolution will be automatically set to the highest supported by the TV.
NOTE
✎
`
If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the
wireless network.
`
`
A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu.
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
`
`
Set your wireless router to Infrastructure mode. Adhoc mode is not supported.
The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
Out to an audio sytem to hear audio.
B. Connecting to an Audio System
`
`
`
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it will result in interference and communication
failure.
• Please turn the volume down when you turn on the AV receiver. A sudden loud sound
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with
new Wi-Fi certification specifications.
may cause damage to the speakers and your ears.
• Please set the audio format according to the capabilities of your AV receiver.
• The position of HDMI input terminals may vary depending on your AV receiver. Please
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router
refer to the user manual of your AV receiver.
performance, distance, obstacles, interference by other radio devices, etc).
7
Settings
Connecting to a TV
A
B
`
If you leave the player in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
The Initial Settings Procedure
•
•
•
•
The Home screen will not appear if you do not
configure the initial settings.
HDMI cable
The OSD (On Screen Display) may change in this
player after you upgrade the software version.
(not included)
Menu Navigation
The access steps may differ depending on the
menu you selected.
Connecting to an Audio System
After the loading process of this product is
finished, the panel buttons and remote control
can be operated.
1
2
HDMI cable
(not included)
The Initial Settings Procedure lets you set
the OSD and menu languages, configure
the connection to your home network, and
choose the aspect ratio output (screen size
and format) that is correct for your TV.
3
4
HOME Button : Press to move to the Home
1
NOTE
✎
menu.
HDMI cable
(not included)
`
`
The Home menu will not appear if you do not
RETURN Button : Return to the previous menu.
2
3
4
configure the initial settings except as noted below.
If you press the BLUE (D) button during
(Enter) / DIRECTION Button :
v
network setup, you can access the Home menu
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
even if the network setup is not completed yet.
`
`
When you return to the Home menu, the full
screen mode is cancelled automatically.
EXIT Button : Press to exit the current menu.
If you want to display the Initial Setting screen
Network
C
again to make changes, press the button on
@
• Home menu
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
3
4
5
`
`
After the loading process of this product is
finished, you can operate the HDMI-CEC function.
®
PANDORA
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube
2
HD Movies
CinemaNow
Wireless Router
If you want to use an Anynet+(HDMI-CEC)
function, please follow the instructions below.
6
7
Videos
1) Connect the player to an Anynet+(HDMI-
CEC) compliant Samsung TV using HDMI Cable.
Broadband service
8
1
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
9
NOTE : You can only connect this unit to a network via a wireless connection.
✎
3) Set the TV to the Initial Settings Procedure.
No Disc
a
Change Device
d
View Devices
"
Enter
0
8
NOTE
NOTE
✎
✎
Resolution
Selects Videos.
Selects Netflix.
Selects VUDU HD Movies.
Selects CinemaNow.
Selects Pandora Internet Radio.
Selects YouTube.
Selects Photos.
Selects Music.
Selects Settings.
1
2
3
4
5
6
7
8
9
`
The access steps may differ depending on
`
If the TV you connected to the player does not
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
480p. The number indicates the number of
lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
support Movie Frame or the resolution you
selected, the message “If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?” appears. If you
select Yes, the TV’s screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
Display Settings
®
Resolution according to the output
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc. mode
`
If the screen stays blank after you have
changed the resolution, remove all discs,
TV Aspect Ratio
• Blu-ray disc/E-contents/digital Contents
and then press and hold the button on the
@
playback
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
Depending on the type of television you have,
you may want to adjust the screen size setting.
HDMI / connected
HDMI Mode
Output
NOTE
✎
Displays the buttons you can use on the
E-contents/
0
Setup
remote to access functions.
`
`
Depending on the disc type, some aspect
ratios may not be available.
Blu-ray Disc
Digital
`
`
When the factory default settings are restored,
all stored user BD data is deleted.
contents
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
NOTE
✎
The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Resolution of
BD Wise
1080p
`
The Videos, Photos, and Music options require
that you have an appropriate disc inserted into the
player or a USB flash device attached to the player.
Blu-ray Disc
Max. Resolution Max. Resolution
`
`
If you select the 4:3 Pan-Scan or 4:3 Letter
Box, pressing the FULL SCREEN button on the
remote will not bring up a full screen picture.
Auto
movie Frame (24Fs)
of TV input
1080@60F
of TV input
1080@60F
`
The Netflix, VUDU, Cinema Now, Pandora, and
YouTube options require a working Internet
connection.
1080p@60F
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player’s HDMI
output to 24 frames per second for improved
picture quality.
If you select the 16:9 Original, your TV may display
4:3 Pillarbox (black bars on sides of picture). If this
occurs, pressing the FULL SCREEN button on the
remote will not bring up a full screen picture.
(Movie Frame : Off)
Movie Frame :
Auto (24Fs)
1080@24F
1080p@24F
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080i or 1080p output
resolution modes.
Accessing the Settings Menu
1080i
720p
480p
1080i
720p
480p
1080i
720p
480p
Bd Wise (Samsung TVs only)
To access the Settings menu and sub-menus,
BD Wise is Samsung’s latest inter-connectivity feature.
follow these steps:
When you connect a Samsung player and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on
in both the player and TV, the player outputs video at the
video resolution and frame rate of the Blu-ray Disc/DVDs.
• dVd playback
1.
2.
3.
Press the pOWER button.
The Home Menu appears.
HdmI Color Format
Output
Setup
HDMI / connected
Press the ◄► buttons to select Settings,
HDMI Mode
Lets you set the color space format for
and then press the
button.
v
NOTE
✎
BD Wise
Auto
480i
HDMI output to match the capabilities of the
Press the ▲▼ buttons to select the
cHodnnmecIteddedeevpiceC(oTVl,omronitor, etc).
`
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
Max. Resolution of TV input
desired submenu, and then press the
1080p
1080i
1080p
1080i
720p
480p
button.
v
`
`
If the player is connected to a device that does not
4.
5.
Press the ▲▼ buttons to select the desired
720p
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
support BD Wise, you can not use the BD Wise function.
item, and then press the
button.
v
480p
For proper operation of BD Wise, set the BD
Press the ExIT button to exit the menu.
Wise menu of both the player and the TV to On.
9
* If the Source Stream is 2ch, “Re-encoded
Dolby D” Setting is not applied. Output will
be PCM 2ch.
• If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio
even though you set PCM Downsampling
to Off.
progressive mode
Lets you improve picture quality when viewing DVDs.
Blu-ray Discs may include three audio
streams :
Audio Settings
-
-
Main Feature Audio : The audio soundtrack
of the main feature.
dynamic Range Control
digital Output
You can listen at low volumes, but still hear
dialog clearly.
BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
Set the Digital Output to match the capabilities of the AV receiver you’ve connected to the
player : For more details, please refer to the Digital Output Selection table below.
This is only active if your player detects a
Dolby Digital signal.
-
Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different on
each Blu-ray Disc.
digital Output Selection
downmixing mode
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Bitstream
Setup
PCM
Select the Downmix method for stereo output.
(Unprocessed)
NOTE
Re-encoded
✎
PCM
Up to PCM 7.1ch
PCM 2ch
PCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS re-encoded
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Dolby Digital *
`
`
Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
Re-encoded
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital *
If the HDMI device (AV receiver, TV) is not
Re-encoded
PCM 2ch
compatible with compressed formats (Dolby
Dolby Digital *
Audio Stream
on Blu-ray
Disc
Digital, DTS), the audio signal outputs as PCM. Auto procedure for network setup. This is
Re-encoded
PCM 2ch
easiest and will work in the majority of cases.
Dolby Digital *
`
`
`
Regular DVDs do not have BONUSVIEW audio
If it is static, you must use the manual set up
Re-encoded
and Navigation Sound Effects.
PCM 2ch
procedure. (See page 11.)
Dolby Digital *
Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
Network setup directions start below.
DTS-HD Hi
Re-encoded
PCM 2ch
DTS-HD Hi Resolution Audio DTS re-encoded
Resolution Audio
Dolby Digital *
NOTE
✎
DTS-HD Master
Audio
Re-encoded
If you play MPEG audio soundtracks, the audio
PCM 2ch
DTS-HD Master Audio
DTS re-encoded
`
This unit can only be connected to a Network
via a wireless connection.
Dolby Digital *
signal outputs as PCM regardless of your
PCM
Dolby Digital
DTS
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
pCmDdigoitawl Onutspuat mselepctliionnsg(PCM or Bitstream).
Audio Stream
on DVD
Automatic Network Setup
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the PCM
audio into Dolby
Digital bitstream or
PCM.
Decodes the main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
1.
In the Home menu, press the ◄►
Outputs only the main feature
buttons to select Settings, and then
Decodes the main feature audio stream so that your
audio and BONUSVIEW AV receiver can decode the
press the
button.
v
HdmI
Definition for
Blu-ray Disc
2.
3.
Press the ▲▼ buttons to select Network,
Any
audio stream together
audio bitstream.
• If your TV is not compatible with
and then press the
button.
v
into PCM audio and adds You will not hear BONUSVIEW
Navigation Sound Effects. audio or Navigation Sound
Effects.
compressed multi-channel formats (Dolby
Digital, DTS), the player may output PCM
2ch downmixed audio even though you
selected Bitstream (either Re-encoded or
Unprocessed) in the setup menu.
Press the ▲▼ buttons to select
Network Setting, and then press the
button. The Network Setting screen
v
bitstream.
appears.
10
• Use the arrow keys on your remote
to move from button to button on the
Security Key screen.
10. Wait until the connection confirmation
message is displayed, and then press
the v button. The Network Settings
screen reappears.
6.
Enter the Ip Address, Subnet mask,
Settings
Displa
and Gateway values.
Network Setting
Access Point Selection
:
:
:
:
:
Not Selected
Auto
Audio
7.
Press the ▼ to go to dNS.
Internet Protocol Setup
\
Netwo
System
IP Address
Subnet Mask
Gateway
0
0
0
0
0
0
0
0
0
0
0
0
•
To change the kind of characters
you are entering, move to the button
labeled a/A/1/, and then press the
8.
Press the ▼ button to go to the first
DNS entry field. Enter the numbers as
above.
Langu
11. To test the connection, press the ▼
button to select Network Test, and then
press the v button.
Securi
DNS
:
Auto
Gener
Suppo
DNS Server
:
0
0
0
0
v
v
button. Each time you press the
button, you change the kind of
a
WPS(PBC)
>
Move
"
Select
'
Return
9.
When done, press the ▲ button to return
to Access Point Selection. Select the
characters you can enter (a/A/1/).
manual Network Setup
network, and then press the
button.
v
4.
leAccess point Selectionn
then press the v button.
• You can also change the kind of
character by pressing the dISC
mENU button on the remote.
If the Auto Setting does not work, you need
to enter the Network settng values manually.
WpS(pBC) function
The Network function searches for
available wireless networks.
When done, it displays a list of the
available networks.
Before you start manual network setup, you
need the network setting values.
The easiest way to set up the wireless
• To enter a letter, press the number
button that corresponds to the
letter. Pressing the button repeatedly
changes the letter.
network connection is using the WPS(PBC)
function.
To get the Network setting values, contact
your ISP or your network administrator.
If your wireless router has a WPS(PBC)
button, follow these steps:
5.
6.
In the list of networks, press the ▲▼
buttons to select a network, and then
press the v button.
To Enter the Network settings into your player,
• To enter a number or symbol when
the Security Key screen is displaying
numbers or symbols, press the
follow these steps:
1.
In the Network Settings menu, press the
▲▼ buttons to select Network Setting,
If the Security Key screen appears, go
to Step 7. If the Network Connecting
Screen appears, go to Step 10.
1.
2.
On the Internet Protocol Setup screen,
and then press the
button.
v
press the
button.
v
corresponding number button once.
The Internet Protocol Setup screen
Press the ▲▼ buttons to select manual,
• To delete the last letter, number, or
symbol you entered, move to the
delete button, and then press the
v button.
appears.
and then press the
button.
v
7.
On the Security Key screen, enter your
2.
3.
Press the REd (A) button on the remote
network’s Pass Phrase.
control.
Settings
NOTE
✎
Network Setting
Displa
Press the WpS(pBC) button on your
router within two minutes. Your player
displays the Network Selection Screen,
and automatically acquires all the
Access Point Selection
Internet Protocol Setup
:
:
:
:
:
Not Selected
Manual
• To see and use additional symbols,
`
You should be able to find the Pass Phrase on
one of the set up screens you used to set up
your router or modem.
Audio
\
Netwo
System
press the
[
or
]
button when
IP Address
Subnet Mask
Gateway
0
0
0
0
0
0
255 255 255
the Security Key screen is displaying
Langu
Securi
0
0
0
symbols.
DNS
:
Manual
Gener
Suppo
DNS Server
:
0
0
0
0
network setting values it needs and
connects to your network. When it is
done, it displays an OK button. Press
Settings
• To clear all entered letters, numbers,
and symbols, move to the Clear
All button, and then press the v
button. You can also just press the
REd (A) button on your remote.
a
WPS(PBC)
>
Move
"
Select
'
Return
Security Key
Display
Security Key
(0)
Audio
a
b
c
Networ
System
Langua
Securit
Genera
Suppor
the
button on your remote.
v
.,@
ghi
abc
jkl
def
mno
1
4
7
2
5
8
0
3
6
9
4.
After the network connection is set up,
press the RETURN button to exit the
Network Setting screen.
3.
4.
5.
Press the ▼ button to go to the first
entry field (IP Address).
pqrs
tuv
wxyz
a/A/1/
Delete
a
Clear All
b
Space
Cursor
c
Done
9.
When done, press the yELLOW (C)
button on your remote, or move to the
done button, and then press the v
button.
Use the number buttons to enter
(
/
)
"
Select
'
Return
numbers.
NOTE
✎
`
To comply with the revised Wi-Fi standard
specifications, WEP encryption of the wireless
router does not support WPS connections.
When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow
8.
nha, fle
general directions:
The Network Connecting screen
appears.
buttons to move up, down, and back.
11
2.
3.
Insert a Blu-ray Disc that supports BD-
LIVE.
`
`
If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
Network Test
playing content located in your
pC on the Blu-ray disc player
Use this menu item to check whether your
Depending on your TV, certain HDMI output
resolutions may not work.
Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
nNeetwtworkocroknSnetcatitounsis working or not.
You can view shared files from your computer
on your Blu-ray Disc Player.
Please refer to the user manual of your TV.
`
`
After the product was turned off, disconnecting and
connecting the power cable turns it on automatically.
At the moment, it automatically turns off in about
15 seconds for re-establishing Anynet+ connection.
You can get detailed instructions for using
NOTE
✎
AllShare from the Samsung.com web site.
Use to check whether a connection to a
`
The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
nBedtw-oLrkivaendItnheteInrtnerenettChaovenbneeecnteisotanblished.
Blu-ray Disc Player
For some TV products, if connected to this
product with Anynet+ function, turning the TV on
may display a warning popup message saying no
connection was found. Still, Anynet+ connection
Play back
PC’s files
Using the AllShare Function
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
AllShare lets you play music, video, and photo
files located in your PC or NAS on the player.
Bd dias tparopmerlyaenstaabglisheemd aendnatvailable to use.
AllShare Connection
• Allow (All) : The Internet connection is
To use AllShare with your player, you must
connect the player to your network (See
pages 10~12).
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
System Settings
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
To use AllShare with your PC, you must install
AllShare software on your PC.
Initial Settings
• prohibit : No Internet connection is allowed
If you have NAS, you can use AllShare without
any additional software.
for any BD-LIVE content.
You can check the device’s information
including the storage size, delete the BD data,
or change the Flash memory device.
By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 8).
NOTE
✎
To download AllShare software
`
What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
NOTE
✎
1.
Go to Samsung.com
`
In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
2.
Click Support, enter your player’s
product number in the field that
appears, and then click Product.
Anynet+ (HdmI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
`
Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
`
The Internet connection may be restricted
3.
On the next screen, click Get downloads
while you are using BD-LIVE contents.
under Downloads.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the pLAy
4.
5.
Click Software on the next page.
Using the Bd-LIVE™
`
`
The Resume Play function may not work after
Click the icon in the AllShare line under
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
you format the storage device.
File to start the download.
The total memory available to BD Data
Management may differ, depending on the
conditions.
(
) button on the TV’s remote control.
For more information, please see the TV user
1.
Attach a USB memory stick to the USB
jack on the back of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BD-
LIVE services.
manual.
✎
NOTE
`
This function is not available if the HDMI cable
does not support CEC.
12
4.
The update progress popup will appear.
When the update is completed, the
player will turn off automatically.
Language Settings
If you forgot your password
Netflix Lock
Restrict the use of the Netflix service unless
You can select the language you prefer for the
1.
Remove any discs.
tVhUe 4ddUigiLt PoINckis entered.
Home menu, disc menu, etc.
5.
Press the pOWER button to turn on the
2.
Press and hold the @ button on the
front panel for 5 seconds or more.
All settings will revert to the factory settings.
player.
NOTE
NOTE
✎
✎
`
The selected language will only appear if it is
supported on the disc.
Restrict the use of the VUDU service unless
the 4 digit PIN is entered.
NOTE
✎
`
The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`
When the factory default settings are restored,
all the user stored BD data will be deleted.
pandora Lock
Security Settings
`
`
Never turn the player off or back on manually
Restrict the use of the Pandora service unless
during the update process.
General Settings
When you access this function for the first
time, the PIN screen appears. Enter the
default PIN - 0000 - using the number
buttons. To change the PIN, use the Change
PIN function (page 13). Each time you access
the Security Settings hereafter, you must
enter that four digit PIN. If you don’t change
the PIN, continue using the default PIN.
tyhoeu4TduigbitePINLoiscekntered.
Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
Time Zone
Restrict the use of the YouTube service unless
the 4 digit PIN is entered.
You can specify the time zone that is
applicable to your area.
`
If you want to cancel the upgrade while the
upgrade software is downloading, press the
Change pIN
button.
Support Settings
v
Change the 4-digit password used to access
security functions.
Bd parental Rating
By USB
Software Upgrade
Prevent playback of Blu-ray Discs with specific
To upgrade by USB, follow these steps:
To change the PIN, follow these steps:
adgVedratipngasruennletsaslthRea4tidniggit PIN is entered.
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
1.
1.
Select Change PIN, and then press the
button. The Enter old PIN screen
v
2.
Download the latest USB software
appears.
upgrade zip archive to your computer.
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
2.
Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000.
The Enter new PIN screen appears.
By Online
3.
Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
To upgrade By Online, follow these steps:
1.
Select By Online, and then press the
3.
4.
Enter the new PIN in the Enter new PIN
4.
5.
Copy the RUF file to a USB flash drive.
button. The Connecting to Server
v
fields.
message appears.
Select the rating level you want to set.
For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
Re-enter the new PIN in the Confirm
new PIN fields. The “PIN is changed
successfully.” message appears.
2.
3.
A popup message will appear if an
update is available.
A larger number indicates more mature content.
6.
7.
In the player’s menu, go to Settings >
If you select yes, the player will turn off
automatically before restarting.
(Never turn the player on during an
upgrade.)
5.
Press the
button.
v
Support > Software Upgrade.
CinemaNow Lock
Select By USB.
Restrict the use of the CinemaNow service
unless the 4 digit PIN is entered
13
NOTE
NOTE
✎
✎
`
The update is complete when the player turns
Media Play
`
`
`
`
No disc should be in the product when you
off after restarting. Press the POWER button to
upgrade the software using the USB Host jack.
turn on the updated player for your use.
Insert a Disc
When the software upgrade is done, check the
`
`
Never turn the player off or on manually during
PANDORA
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube
HD Movies
CinemaNow
software details in the software Upgrade menu.
the update process.
1.
2.
3.
4.
Press the
button to open the disc
8
Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
Samsung Electronics takes no legal
tray.
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Push a disc gently into the disc tray with
the disc's label facing up.
Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
No Disc
123
DLNA
Press the
button to close the disc
8
123
a
Change Device
c
Safely Remove USB
d
View Devices
"
Enter
Contact Samsung
tray. Playback starts automatically.
Auto Upgrade Notification
5.
6.
Press the ▲▼ buttons to select USB,
Provides contact information for assistance
If playback does not start automatically,
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
then press the
button.
v
select the Videos option on the Main
wTeithrmyosuropflaSyeer.rvice Agreement
screen, and then press the
button.
v
Press the ◄► buttons to select Videos,
Music or Photos, then press the
v
button. Go to Step 7.
View the general disclaimer regarding third
party contents and services.
Insert a USB Device
-1
4 . If you pressed the BLUE (d) button, the
To set Auto Upgrade Notification on, follow
-1
screen below appears. Go to 5 .
these steps:
You can play multimedia files located on a
Reset
USB storage device.
1.
2.
Select Auto Upgrade Notification, and
PANDORA
i
n
t
e
r
n
e
t
r
a
d
i
o
YouTube
then press the
button.
v
HD Movies
CinemaNow
1.
2.
Move to the Home menu.
All settings will revert to the factory default
except for the network settings.
Use the ▲▼ buttons to select On, and
In Stop mode, connect the USB storage
device to the USB port on the back
panel of the player.
then press the
button.
v
123
If there is a new software version available,
the player notifies you with a popup message.
The message “Do you want to access
the device?” will be displayed.
1.
To upgrade the firmware, select yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn on the player
manually here.)
123
d
Home
"
Enter
3.
4.
Press the ◄► button to select yes,
then press the
button.
v
-1
5 . Press the ◄► buttons to select USB,
If you have a disc in the Blu-ray player,
press the REd (A) or BLUE (d) button.
If you do not, go to Step 6.
then press the
button.
v
-1
2.
3.
4.
The update progress popup appears.
6 . Press the ▲▼ buttons to select Videos,
When the update is complete, the player
turns off again automatically.
Music or Photos, then press the
v
If you pressed the REd (A) button, go to
button.
Step 5.
Press the pOWER button to turn on the
If you pressed the BLUE (d) button, go
7.
The controls and tools you use to play
videos, music, and pictures located on
a USB device are identical to those you
use to play videos, music, and pictures
on a disc. (See pages 15~16)
-1
player.
to Step 4 .
14
NOTE
Controlling Music Playback
✎
Repeat an Audio Cd (Cd-dA)/
button
button
button
Starts playback.
Stops playback.
6
5
7
`
You must remove the USB storage device
mp3
You can control the playback of music
safely (by performing the “Safely Remove USB”
function) in order to prevent possible damage
to the USB memory. Press the MENU button to
move to the Home menu, select the YELLOW
content located on a DVD, USB, or PC.
1.
During Playlist playback, press the
Pauses playback.
During playback, press the
TOOLS button.
Buttons on the Remote Control
or
3
(C) button, and then press the
button.
v
button.
used for music playback
4
Tools
Fast Motion
Play
TRACK 0
Each time you press the
or
3
Repeat Mode
?
Off
\
`
`
When Audio-CD (CD-DA), MP3 or JPEG files
are in stop mode, pressing the FULL SCREEN
button on the remote will not bring up a full
screen picture.
Inform
a
ti
on
button, the playback speed
4
<
Adjust
>
Move
'
Return
TRACK 005
TRACK 006
will change.
03:17
1
+
00:08 / 05:57
In pause mode, press the
4
If you insert a disc when playing a USB storage
device, the device mode changes to “DVD or
CD” automatically.
button.
03:35
Slow Motion
Play
Each time you press the
4
"
Pause
Tools
'
Return
CD
4
5
button, the playback speed will
change.
2
2.
3.
ess h◄► btos o slcRepeat
In pause mode, press the
7
mode.
Controlling Video Playback
You can control the playback of video content
located on a DVD, CD, or USB storage device.
Depending on the disc, some of the functions
described in this manual may not be available.
3
6
Step Motion
Play
button.
Press the
button.
v
Each time you press the
7
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
button, a new frame appears.
Songs are played in the order
Off
1
in which they were recorded.
During playback, press the
or
1
button.
2
The selected track is played.
Skip Motion
Play
(
(
) One Song
) All
The current song is repeated.
All songs are repeated.
Each time you press
or
1
2
Buttons on the Remote Control
Skip : During playback, press the
the playlist.
or
1
2
button, the disc moves to the
previous or next chapter or file.
used for Video playback
button to move to the previous or next file of
2
3
The random option plays
(
)
Shuffle Mode
2
songs in random order.
Using the disc menu, title menu,
wq
button : Stops a track.
5
popup menu, and title list
Fast Play (Audio CD (CD-DA) only)
During playback, press the
button.
or
3
4
1
DISC MENU
During playback, press this button
4
button
to start the disc menu function.
Each time you press the
or
button,
3
4
TITLE MENU
During playback, press this button
to start the title menu function.
the playback speed will change.
button
Pause : Pauses a track.
5
6
playback related buttons
qq
POPUP MENU
button
During playback, press this button
button : Plays the currently selected
6
track.
to start the popup menu function.
The player does not play sound in Search,
Slow or Step mode.
• To return to normal speed playback, press
the
button.
6
15
Playing Photo Contents
playlist
Appendix
You can play photo contents located on a
1.
To move to the Music List, press the
5
DVD, CD, or a USB storage device.
or RETURN button.
Troubleshooting
The Music List screen appears.
Using the Tools menu
Before requesting service, please try the following solutions.
1/2 Page
Music
TRACK 001
During playback, press the TOOLS button.
TRACK 001
TRACK 001
02:38
02:38
PROBLEM
No operation can be
performed with the remote
control.
SOLUTION
TRACK 001
TRACK 001
02:38
Slide Show
Select to start the slide show.
02:38
TRACK 001
02:38
TRACK 001
•
•
•
Check the batteries in the remote control. They may need replacing.
02:38
Background
Select to listen to music while
TRACK 001
TRACK 001
02:38
02:38
Operate the remote control at a distance of no more than 20 feet.
Music
Zoom
viewing a slide show.
TRACK 001
02:38
TRACK 001
02:38
Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Select to enlarge the current
picture. (Enlarge up to 4 times)
c
Select
(
)
Jump Page
'
Return
CD
Select to rotate the picture. (This
2.
3.
Disc does not play.
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the Blu-ray Disc/DVD.
Rotate
will rotate the picture either
to a desired track, and then press the
yELLOW (C) button. A check appears
on the track.
clockwise or counter clockwise.)
Information
Shows the picture information.
Repeat this procedure to select
additional tracks.
Disc Menu does not appear.
•
Ensure that the disc has disc menus.
NOTE
✎
The prohibition message
appears on the screen.
•
•
•
This message appears when an invalid button is pressed.
To remove a track from the list, move to
the track, and then press the yELLOW
(C) button again.
`
`
Depending on the disc or storage device, the
Tools menu may differ.
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
You’ve requested a title or chapter number or search time that is out of range.
To enable the background music function, the
photo file must be in the same storage media
as the music file.
The check on the track is cancelled.
4.
5.
When done, press the
button.
v
Play mode differs from the
Setup Menu selection.
•
Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
To go to the Music List, press the
RETURN button.
The screen ratio cannot be
changed.
•
•
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
This is not a problem with the player.
NOTE
✎
`
You can't enlarge the subtitle and PG graphic
`
You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
in the full screen mode.
No audio.
•
Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank.
•
•
•
If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data is
deleted.
16
PROBLEM
Forgot password
SOLUTION
PROBLEM
BD-LIVE
SOLUTION
•
•
•
•
Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don’t use this unless absolutely necessary.
I cannot connect to the BD-
•
Check whether the network connection is working or not by using the
Network Status menu.
LIVE server.
When the factory default settings are restored, all stored user BD data is
deleted.
•
•
Check whether the USB memory device is connected to the player.
The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
If you experience other
problems.
Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
You can check the available size in BD Data Management.
•
•
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
If all above fails, contact the contents provider or update the player to the
latest firmware.
If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
When using the BD-LIVE
service, an error occurs.
•
The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
The picture is noisy or
distorted
•
•
Make sure that the disc is not dirty or scratched.
Clean the disc.
You can check the available size in BD Data Management.
No HDMI output.
•
•
Check the connection between the TV and the HDMI jack of the player.
NOTE
✎
Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input
resolutions.
`
When the factory default settings are restored, all stored user BD data is deleted.
Repairs
Abnormal HDMI output
screen.
•
•
If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you contact us to repair your player, an administration fee may be charged if either:
AllShare function
I can see folders shared
through AllShare, but I cannot
see the files.
1.
An engineer is called out to your home at your request and there is no defect in the
product.
AllShares shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not displayed.
2.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
Video is played intermittently.
•
•
Check if the network is stable.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before
seeking to repair your player.
Check if the network cable is properly connected and if the network is not
overloaded.
AllShare connection between
Player and PC is unstable.
•
•
The IP address under the same subnetwork should be unique. If they are not,
IP interference can cause this phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
17
Specifications
Compliance and Compatibility Notice
NOT ALL discs are compatible
Power Requirements
Power Consumption
Weight
AC 120V, 60Hz
10.5W
2.2 Ibs
• Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
General
USB
• Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
Dimensions
10.6 (W) X 7.6 (D) X 1.6 (H) inches
+41°F to +95°F
10 % to 75 %
USB 2.0
Operating Temperature Range
Operating Humidity Range
Type A
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
DC output
Video
Audio
Wireless LAN
5V 500mA Max.
1080p, 1080i, 720p, 480p
PCM, Bitstream
Bulit-in
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-
ray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
HDMI
Network
-
-
-
-
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
Weight and dimensions are approximate.
-
-
not all new and existing disc format versions are supported by this player;
new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-
-
some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
Dispose unwanted electronics through an approved recycler.
or call, (877) 278 - 0799
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-
-
some discs may not be played depending on their physical state or recording conditions;
problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
the manufacture of discs;
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or
for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care center.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
18
• For Blu-ray disc player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Network Service disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorized by the content owner or
service provider. Without limiting the foregoing, unless expressly authorized by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
Copy protection
• Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for
the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of
AACS protected contents.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care center.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their soundtracks. When
a prohibitet use of an unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
To request additional information about Cinavia by email, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138,
USA.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.
19
License
LImITEd WARRANTy TO ORIGINAL pURCHASER
• Manufactured under license from Dolby Laboratories. Dolby and the
This SAMSUNG brand product, as supplied and this product or result in service problems; incorrect
distributed by SAMSUNG and delivered new, in the electrical line voltage, fluctuations and surges;
original carton to the original consumer purchaser, customer adjustments and failure to follow operating
is warranted by SAMSUNG against manufacturing instructions, cleaning, maintenance and environmental
defects in materials and workmanship for a limited instructions that are covered and prescribed in the
double-D symbol are trademarks of Dolby Laboratories.
warranty period of:
instruction book; product removal or reinstallation;
reception problems and distortion related to noise,
echo, interference or other signal transmission and
delivery problems. SAMSUNG does not warrant
uninterrupted or error-free operation of the product.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
One (1) year parts and Labor*
(*90 days parts and Labor for Commercial Use)
This limited warranty begins on the original date of
purchase, and is valid only on products purchased and
used in the United States. To receive warranty service,
the purchaser must contact SAMSUNG for problem
determination and service procedures. Warranty
service can only be performed by a SAMSUNG
authorized service center. The original dated bill of sale
must be presented upon request as proof of purchase
to SAMSUNG or SAMSUNG's authorized service
center. Transportation of the product to and from the
service center is the responsibility of the purchaser.
THERE ARE NO EXPRESS WARRANTIES OTHER
THAN THOSE LISTED AND DESCRIBED ABOVE, AND
NO WARRANTIES WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER
THE EXPRESS WARRANTY PERIODS STATED ABOVE,
AND NO OTHER EXPRESS WARRANTY OR GUARANTY
GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE
FOR LOSS OF REVENUE OR PROFITS, FAILURE TO
REALIZE SAVINGS OR OTHER BENEFITS, OR ANY
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL
THEORY ON WHICH THE CLAIM IS BASED, AND EVEN
IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY
KIND AGAINST SAMSUNG BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD
BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE
OR INJURY TO PURCHASER AND PURCHASER’S
PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED
DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
SAMSUNG will repair or replace this product, at
our option and at no charge as stipulated herein,
with new or reconditioned parts or products if
found to be defective during the limited warranty
period specified above. All replaced parts and
products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement
parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software
products distributed by SAMSUNG under the SAMSUNG
brand name are set forth in the applicable end user
license agreement. Non-SAMSUNG hardware and
software products, if provided, are on an “AS IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers,
and service providers may provide their own warranties.
• Open Source License Notice
-
In the case of using open source software, Open Source Licenses are available on the
product menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
This limited warranty covers manufacturing defects
in materials and workmanship encountered in
normal, and except to the extent otherwise expressly
provided for in this statement, noncommercial use
of this product, and shall not apply to the following,
including, but not limited to: damage which occurs in
shipment; delivery and installation; applications and
uses for which this product was not intended; altered
product or serial numbers; cosmetic damage or
exterior finish; accidents, abuse, neglect, fire, water,
lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts,
Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
supplies, accessories, applications, installations,
repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage
To obtain warranty service, please contact
SAMSUNG customer care center.
20
QUESTIONS OR COMMENTS?
COUNTRy
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AK68-02273A-01
|